Open Universiteit

Please use this identifier to cite or link to this item: http://hdl.handle.net/1820/8443
Title: Hardware prototype with component specification and usage description
Authors: Azam, Tre
Aswat, Soyeb
Klemke, Roland
Sharma, Puneet
Wild, Fridolin
Keywords: WEKIT
Hardware Prototype
Sensors
augmented reality
Wearables
Issue Date: 28-Nov-2016
Citation: Azam, T. (Ed.), Aswat, S., Klemke, R., Sharma, P., & Wild, F. (2017, 4 July). Hardware prototype with component specification and usage description. WEKIT project delivarable D3.2. Retrieved from http://wekit.studiohangloose.it/wp-content/uploads/2017/06/WEKIT_D3.2.pdf
Abstract: Following on from D3.1 and the final selection of sensors, in this D3.2 report we present the first version of the experience capturing hardware prototype design and API architecture taking into account the current limitations of the Hololens not being available until early next month in time for integration into the current proposed framework and design. This deliverable involved acquiring, testing and integrating the various off-the-shelf sensors and developing a hardware/software design to connect the various devices and sensors into a single platform. This also involved solving problems around how we would manage the additional computing power, storage and wireless streaming capabilities required for this project. In this first version of the deliverable we propose an initial design for the hardware and architecture and have focussed initially on providing a bare-bones prototype of the Sensor Processing Unit (SPU) which involved combining a micro-pc with various sensors to test the flow of data, capabilities of the system and possible connection methods to the device for the various sensors. The first hardware prototype does not yet include the wearable element, however, our selection of the sensors and micro-pc takes into consideration the desire to integrate the hardware using 3D printing or by creating add-ons for the Hololens to avoid a chunky or multi-device hardware solution; D5.2 (M15) will be providing the final design of the fashion, wearability, and comfort of the device taking into consideration the previously completed desk based research (D5.1, M15). We have provided a mock-up in the Prototype and Usage Descriptions section below of what the final prototype is expected to look like. The separation of the Sensor Processing Unit (SPU) allows for the development of the hardware and software to continue in the absence of the Hololens, but also ensures the platform can be used standalone or is easily adapted to other Smart Glasses. It does not add any further strain on the in-built computers by keeping the sensor processing independent. As described in D3.2 although there are other AR alternatives already available in the market, they all fall short in terms of the required spec and functionality. A decision was then made to work with the Hololens as it would be the best in class and although not available has been tested by key partners and will be available in time for the next deliverable. Within this deliverable we also provide an initial mock-up of the hardware design and also a sample of the API and links to device APIs.
URI: http://hdl.handle.net/1820/8443
Appears in Collections:3. TELI Deliverables and reports

Files in This Item:
File Description SizeFormat 
WEKIT_D3.2.pdf1.36 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons